ViewSonic VP231wb

Con 178 Bri 127 BLight 255
AutoBl SHue 128 SSatu 128
FColorTempSelect
sRGB 9300 6500 5400 5000 User
RGain 241 GGain 255 BGain 245
ROff GOff Boff
Save Color
CopyToDS CopyToDA CopyToDD
Gprobe
Gprobe4.4.0.2.exe 3,055,471 3,014,541 應用程式 2003/8/22 下午 … 5D01EE60
Gprobe 1601
Gprobe4.2.0.3_gm1601.exe 518,506 486,037 應用程式 2003/8/21 上午 … DC22A99
ViewSonic Corporation Confidential
-
Do Not Copy VP231wb
1.0 Set LCD Monitor to Burn In mode (Down key + 2 key +DC power on).
2.0 Set LCD Monitor to Factory mode (1 key + DC power on).
3.0 Into Factory mode (Press up key).
3.1 Select Color temperature sRGB and press 2 Key. The R, G, B, Gain value can be adjust and note.
3.2 Note R, G, B, Gain value of all color temperature.
4.0 Install Gprobe
5.0 Install Gprobe_1601
5.3 Firmware Upgrade Procedure
22