ViewSonic VP231wb

[
1
]. Main Menu.
[
2
].
Select next input. (Sequence: D-SUB
→
DVI-A
→
DVI-D)
[
UP
] or [
DOWN
] arrow. To immediately activate Contrast menu. It should be change to
Brightness
OSD by push button [
2
].
[
UP
] + [
DOWN
] arrows. Recall Contrast or Brightness while in the Contrast or Brightness
adjustment,
or recall both of Contrast and Brightness when the OSD is not open.
[
1
] + [
2
].
Toggle 720x400 and 640x400 mode when input 720x400 or 640x400
mode.
[
1
] + [
UP
] + [
DOWN
]. White Balance. (keep press 5 seconds)
[
2
] + [
UP
] + [
DOWN
]. Video Mirror Function
[
1
] + [
DOWN
]. Power Lock / Power Unlock. (keep press 10 seconds )
[
1
] + [
UP
]. OSD Lock / OSD Unlock (keep press 10 seconds )
DC-Power
+ [
2
] + [
UP
]. Copy EDID to E
2
PROM.
DC-Power
+ [
1
]. Factory mode. (Burn in mode on)
DC-Power
+ [
2
] + [
DOWN
]. Burn in mode on.
DC-Power
+ [
UP
] + [
DOWN
]. Burn in mode off.
DC-Power
+ [
2
]. All mode recall.
AC-Power on
. Enter ISP mode.
ViewSonic Corporation Confidential
-
Do Not Copy VP231wb
Special key (Hot key): Press follows key at turning on momentary.
14