ViewSonic VP2785-2K

5252
To enable PBP mode:
1. Press the 1/2/3/4 key to display the Quick Menu. Then press the 4 key to display
the OSD Menu.
2. Press the 1 or 2 key to select the Setup Menu menu. Then press the 3 key to
enter the menu.
3. Press the 1 or 2 key to select Multi-Picture. Then press the 3 key to enter its sub-
menu.
4. Press the 1 or 2 key to select PBP Left-Right. Then press the 3 key to enable PBP
mode.
2560 x 1440 @ 60Hz
VP2785-2K
Multi-Picture
ECO Mode
DisplayPort
MST
DDC/CI
Save As
All Recall
Off
PBP Left-Right
PIP
Dual Color
Left Source
Right Source
Swap
Setup Menu
Color Adjust ViewMode
Manual Image
Adjust
Input
Select
Audio Adjust
To acvate the KVM funcon:
1. Press and hold the 1 key for 1 second to acvate the KVM funcon.
2. Then you will be able to switch the cursor between the two screens (le/right
window).