ViewSonic VP2785-2K

56
PIP (Picture-in-Picture)
Main Window
Inset Window
To congure PIP:
1. Press the 1/2/3/4 key to display the Quick Menu. Then press the 4 key to display
the OSD Menu.
2. Press the 1 or 2 key to select the Setup Menu menu. Then press the 3 key to
enter the menu.
3. Press the 1 or 2 key to select Multi-Picture. Then press the 3 key to enter its sub-
menu.
4. Press the 1 or 2 key to select PIP. Then press the 3 key to enter its sub-menu.
2560 x 1440 @ 60Hz
VP2785-2K
Multi-Picture
ECO Mode
DisplayPort
MST
DDC/CI
Save As
All Recall
Off
PBP Left-Right
PIP
Dual Color
PIP Source Select
PIP Position
PIP Size
Swap
Setup Menu
Color Adjust ViewMode
Manual Image
Adjust
Input
Select
Audio Adjust
5. To change the input source for the Inset Window, select PIP Source Select and
press the 3 key. Then press the 1 or 2 key to select the desired input source and
press the 3 key to conrm.
6. To adjust the Inset Window posion, select PIP Posion and press the 3 key.
 Press the 3 key to select PIP H.Posion or PIP V.Posion.
 Press the 1 or 2 key to adjust the seng and press the 3 key to conrm.
7. To adjust the Inset Window size, select PIP Size and press the 3 key. Then press
the 1 or 2 key to adjust the seng.
8. To swap the two windows, select Swap and press the 3 key to conrm.