ViewSonic VP2785-2K

57
Dual Color
The monitor comes with a dual color engine to display two dierent color sengs
in PIP (Picture-in-Picture) or PBP mode. You can set dierent color presets in both
windows (Main Window and Secondary Window).
Main Window Secondary Window
NOTE: To enable PIP or PBP mode, refer to the “Mul-Picture” secon on page
53.
To congure Dual Color:
1. Press the 1/2/3/4 key to display the Quick Menu. Then press the 4 key to display
the OSD Menu.
2. Press the 1 or 2 key to select the Setup Menu menu. Then press the 3 key to
enter the menu.
3. Press the 1 or 2 key to select Multi-Picture. Then press the 3 key to enter its sub-
menu.
4. Press the 1 or 2 key to select Dual Color. Then press the 3 key to enter its sub-
menu.
5. Press the 1 or 2 key to select the desired color setting. Then press the 3 key to
confirm.
2560 x 1440 @ 60Hz
VP2785-2K
Multi-Picture
ECO Mode
DisplayPort
MST
DDC/CI
Save As
All Recall
Off
PBP Left-Right
PIP
Dual Color
Adobe RGB
sRGB
EBU
SMPTE-C
REC709
DICOM SIM
D50
CAL 1
CAL 2
CAL 3
Native
Setup Menu
Color Adjust ViewMode
Manual Image
Adjust
Input
Select
Audio Adjust