BIOS Setup Utility
ViewSonic VPC190 25
Boot Settings Configuration
With this sub-menu, you can configure the type of system boot to execute.
• Quick Boot: Enable Quick Boot to allow BIOS to skip certain tests while boot-
ing. This will decrease the time needed to boot the system.
• Quiet Boot: When disabled, the normal POST (Power On Self Test) messages
are displayed when the system boots up. When enabled, ViewSonic logo is dis-
played instead.
• Bootup Num-Lock: Turn the “Power-on state for Numlock” on or off.
Boot Device Priority
This sub-menu lets you specify the boot priority sequence from the available
devices.
To change the specified device, press [Enter] to select an available device from the
list.
To Next Page
Loading...
