This section provides disassembly procedures for PD-S600 DLP Projector. Before you begin
any of these procedures, be sure to turn off the power, computer system, and other attached
devices; then disconnect the power cable from the electronically outlet. Moreover, when you
disassemble the projector, be sure to put the screws in a safe place and separate them accord-
ing to grouping.
Tool Needed
metI OTOHP
reppiNesoNgnoL
mm5seveelSxeH
701:)+(tiBwercS
101:)+(tiBwercS
201:)+(tiBwercS
12
ViewSonic Corporation Confidential
-
Do Not Copy PJ402D
4. Machine Disassembly and Replacement
To Next Page
Loading...
