ViewSonic VS17679 - Using the Projector; Starting up the Projector; First Time Activation; Image Focus

32
Using the Projector
Starng Up the Projector
1. Ensure the projector’s power cord is properly connected to a power outlet.
2. Press the Power buon to turn on the projector.
NOTE: The Status LED will be blue during startup.
First Time Acvaon
If the projector is acvated for the rst me, you will need to select your Preferred
Language, Projecon Orientaon, Network Sengs, and Source Input. Follow
the on-screen instrucons using the OK and Up/Down/Le/Right buons on the
remote control. When the Finish screen appears, this indicates the projector is
ready to use.
Image Focus
Select the Focus buon and press Right or Le to adjust the image unl it is clear.