To Next PageTo Next PageWhy is my ViewSonic VS16500 Projector remote control not working?
If your ViewSonic Projector remote control isn't working, first, replace the batteries. If that doesn't solve the issue, make sure there's nothing blocking the signal between the remote and the projector. Also, ensure you're within 8 meters (26 feet) of the projector. Finally, check that the remote control code matches the projector's code and adjust if necessary.
What to do if my ViewSonic Projector has no picture?
If your ViewSonic Projector is showing no picture, ensure that the video source is turned on and correctly connected. Also, verify that the projector is correctly connected to the input signal device by checking the connection. Finally, make sure the correct input signal is selected using the [Source] key on the projector or remote control.
How to fix a blurred image on a ViewSonic VS16500 Projector?
If your ViewSonic Projector image is blurred, use the focus function to adjust the lens focus. Additionally, ensure that the projector and the screen are properly aligned by adjusting the projection angle, direction, and height of the projector as needed.
Why is my ViewSonic Projector not shutting down?
If your ViewSonic Projector is not shutting down, check that the power cable is properly connected to both the projector's AC inlet and the power outlet, ensuring the outlet switch is on. Also, if you've recently tried to turn it on, wait until the cooling down process has completed before attempting to shut it down again.
General