ViewSonic VS16500 - Description of each Menu

42
Description of each menu
FUNCTION Description
1. Display menu
Screen Color See “Using Screen Color” for details.
Aspect Ratio See “Selecting the aspect ratio” for details.
Keystone See “Correcting keystone” for details.
Corner Adj. See “Adjusting the 4 corners” for details.
Position
Displays the position adjustment page. To move the
projected image, use the directional arrow keys. The
values shown on the lower position of the page change
with every key press you made until they reach their
maximum or minimum.
This function is only available when a PC input signal is
selected.
The adjustment range may vary under different timings.
Phase
Adjusts the clock phase to reduce image distortion.
This function is only available when a PC input signal is
selected.
H. Size
Adjusts the horizontal width of the image.
This function is only available when a PC input signal is
selected.
Zoom See “Magnifying and searching for details” for details.
OverScan
Adjusts the overscan rate from 0% to 5%.
ThisfunctionisonlyavailablewhenaCompositeVideo,
S-Video or HDMI input signal is selected.
2. Image menu
Color mode See “Selecting a picture mode” for details.
Brightness See “Adjusting Brightness” for details.
Contrast See “Adjusting Contrast” for details.
Color Temperature
For more details, please refer to “Selecting a
Color Temperature” and “Setting a preferred color
temperature”.