ViewSonic VS19796 - Page 36

36
Problem or Issue Possible Soluons
MRC1010-TN Touch
console built-in PIR
sensor wake-up
seng.
Switch from the MTR account to the administrator
account:
1. Go to the MTR sengs page.
2. Select Windows Sengs.
3. Select Administrator and enter the administrator
password, "s".
4. In the Search Box on the Windows Task Bar, search
for and open Device Manager.
5. In Device Manager, select: Sensors > HID Human
Presence Sensor Properes > Power Management.
6. Select the checkbox next to "Allow this device to
wake the computer".