Maximum
Loading
Hole Pattern (W x
H)
Interface Pad (W x H x
D)
Pad
Hole
Screw Specification &
Quantity
14 kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm M4 x 10 mm - 4 pieces
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the scree facing down.
3. Remove the stand.
4. Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4)
screws (M4 x 10 mm).
5. Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.
Connecting to Power
1. Connect the power cord to the AC IN jack at the rear of the device.
2. Connect the power cord plug to a power outlet.
To Next Page
Loading...
