Do you have a question about the Viking Range LPKPDR and is the answer not in the manual?
Critical safety instructions regarding fire and explosion hazards, including what to do if gas is smelled and who should perform installation.
Instructions for converting the regulator using the flip cap method, including identifying the type and reversing the cap.
Instructions for converting the regulator using the hex nut cap method, including plunger reversal and reinstallation.
Procedure for changing the infrared broiler orifice, including locating the specific orifice and replacing it.
Steps to prepare for top surface conversion by removing grates, burner bowls, and other components.
Instructions for replacing the orifice on sealed type 1 surface burners, including tool usage and venturi adjustment.
Procedure for replacing the orifice on sealed type 2 surface burners, including special notes for PowerPlus™ models.
Steps to replace the orifice for designer range and rangetop surface burners, including burner base handling.
Instructions for converting open burner type 3, including air shutter adjustment and orifice depth setting.
Procedure for replacing the orifice on a U-shape griddle burner with spark ignition, including air shutter adjustment.
Steps to replace the orifice for straight tube griddle burners with spark ignition, emphasizing orifice depth.
Procedure for converting straight tube griddle burners with glow bar ignition, including orifice removal and reassembly.
Instructions for converting grill burners, including removal of components, air shutter adjustment, and orifice replacement.
Procedure for converting wok burners, including air shutter adjustment and proper orifice tip positioning.
Steps for converting 'L' shaped bake burners, including removal of oven components and orifice replacement.
Procedure for converting 'U' shaped bake burners, focusing on air shutter adjustment and orifice tip depth.
| Brand | Viking Range |
|---|---|
| Model | LPKPDR |
| Category | Accessories |
| Language | English |