Page 9For technical questions, please call 1-888-866-5797.Item 57085
SAFETYOPERATIONMAINTENANCE SETUP
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY: Unplug the Jump Starter, turn the Clamp Power Switch off and allow
Jump Starter to cool completely before performing any inspection, maintenance, or cleaning procedures.
1. BEFORE EACH USE, inspect the general
condition of the Jump Starter. Check for:
• loose hardware
• cracked or broken parts
• damaged electrical wiring or cable insulation
• any other condition that may
affect its safe operation.
2. Keep unit clean and clamps free
of dirt, debris, or grease.
3. For longer working life, protect unit
from sunlight and moisture.
4. AFTER USE, wipe external surfaces of
the Jump Starter with clean cloth.
Battery Disposal
WARNING! TO PREVENT SERIOUS INJURY: CONTAINS NON-SPILLABLE, SEALED LEAD-
ACID BATTERY. BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY.
1. Remove all screws from case and open. Cut wires
from battery with insulated wire clippers and remove.
2. Disposing of the Jump Starter must comply
with standards for hazardous waste disposal
in your area. Contact your local city
government office for the nearest hazardous
waste disposal area in your community.
To Next Page
Loading...
