EasyManua.ls Logo

Viking FDB451 - General Information; Warnings; Electrical

Viking FDB451
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
7
Dimensions & Cutout Dimensions
6
28-3/4”
(73.0 cm)
33-7/8”
(86.0 cm)
49”
(124.5 cm)
23-7/8”
(60.6 cm)
23-5/8”
(60.0 cm)
3”
(7.6 cm)
23-5/8”
(60.0 cm)
26-5/8”
(67.6 cm)
24”
(61.0 cm)
24”
(61.0 cm)
34” min.
(86.4 cm)
to
35” min.
(89.0 cm)
Note: A 2” (5.1 cm)
cut-out is required
for water supply
and discharge lines.
Built-In Dishwasher
Description
301 Models 451 Models
Overall width
23-7/8” (60.6 cm)
Overall height from floor
33-7/8” (86.0 cm) min. to 35” (89.0 cm) max.
Overall depth from rear
To edge of side – 23-5/8” (60.0 cm) – includes door panel
With door open – 49” (124.5 cm)
Cutout width
24” (61.0 cm)
Cutout height
34” (86.4 cm) min. to 35” (89.0 cm) max.
Cutout depth
24” (61.0 cm)
Electrical requirements
15.0 amps, 120VAC/60 Hz;
3’9” (1.1 m) electrical cord 3 prong plug supplied with unit.
Water-heating element rating
1200 watts
Inlet water temperature
120°F (49°C) required 120°F (49°C) recommended;
Dishwasher will perform properly
with cold water.
Note: Cycle times
will vary.
Inlet water pressure
operating range
10 to 125 psi (0.69 to 8.62 bar)
Inlet water hose
5’
(1.5 m) braided stainless steel water line with 3/8” (0.95 cm)
compression
fitting connected to dishwasher
Drain hose
7’ (2.13 m) 1/2” (1.3 cm) ID “crimp-proof” flexible drain hose
attached to dishwasher, connections provided for 5/8” (1.6 cm),
3/4” (1.9 cm) or
1” (2.5 cm), cut as required
Drain hose high loop required
Height from floor – 20” (51.0 cm) min.
Approximate shipping weight
152 lbs. (68.9 kg) 157 lbs. (71.2 kg)
Custom PanelProfessional

Other manuals for Viking FDB451

Related product manuals