To Next PageTo Next PageWhy is there foam in my Viking Dishwashers?
Foam in your Viking dishwasher can be due to pre-washing dishes with too much detergent; it's generally not necessary to pre-wash. Also, if rinse agent spills into the machine, clean it up with a cloth or sponge. Always make sure the rinse agent dispenser cover is securely closed after refilling.
Why does detergent residue remain in my Viking Dishwashers dispenser?
Detergent residue in your Viking dishwasher's dispenser can occur for several reasons. Ensure the dispenser is dry before filling it and add detergent just before washing. Avoid blocking the dispenser lid with large items. Store detergents properly in a dry location with the lid closed. Clean the spray arms if nozzles are clogged and ensure the spray arms can rotate freely. Also, terminating the cycle early can leave residue.
Why are there rust stains in my Viking Dishwashers?
Rust stains and surface damage in your Viking dishwasher may occur if the salt container lid isn't closed properly; ensure it's firmly closed and use the Rinse and Hold program after refilling salt. Remove food leftovers promptly and use the Rinse and Hold program regularly. Check the grounding of the dishwasher. Avoid washing low-grade, rust-free steel cutlery or items with existing rust stains, as these are not suitable for dishwashers.
How to get rid of bad smell from Viking Dishwashers?
To eliminate odors from your Viking dishwasher, consider these points: if it's a new machine, the smell should fade after a few wash cycles with detergent. Ensure that all filters are clean. Avoid letting dirty dishes sit for days; remove any large food particles and use the Rinse and Hold program every couple of days without detergent. Regularly clean the door gasket with a damp cloth and a gentle cleaner, rinsing thoroughly.
Why are there calcium streaks on my Viking Dishwashers dishes?
Calcium streaks or a misty appearance on dishes from your Viking dishwasher can be due to insufficient rinse agent. Try increasing the amount of rinse agent or refilling the dispenser. It could also be related to water hardness settings; contact your water supplier to check your local water hardness and adjust the dishwasher settings accordingly. If your model has a salt container, ensure the lid is firmly closed, use a funnel to add special salt, and run the Rinse and Hold program afterward, checking the lid again for looseness.
How to get Viking Dishwashers dishes dry?
To improve drying in your Viking dishwasher, ensure proper loading as suggested in the manual and that you have sufficient rinse agent. Increase the dosage if needed or refill the dispenser. Avoid removing dishes too soon after the cycle ends; instead, slightly open the door to let steam escape, and wait until the dishes are hand-warm before unloading, starting with the lower rack. Also, select a program with a longer drying time. Note that some cutlery with a worn surface might not dry well in a dishwasher.
How to dry dishes in Viking FDW103?
To fix dishes that are not drying in your Viking Dishwasher, ensure you are loading the dishwasher as suggested in the manual. Increase the dosage of rinse agent or refill the rinse agent dispenser if the supply is insufficient. Avoid emptying the dishwasher immediately after washing; instead, open the door slightly to let steam escape and wait until the dishes are only hand warm before unloading, starting with the lower rack. Select a program with a longer washing time, as shorter programs may have lower wash temperatures. Also, note that cutlery with a worn surface may not be suitable for dishwashers.
Why are my Viking Dishwashers dishes not clean?
Several factors can cause your Viking dishwasher to not clean dishes properly. Ensure you are loading the dishwasher correctly as described in the manual and selecting a program that washes at a higher temperature or runs for a longer duration. Check that the spray arms are not blocked, the filters are clean and correctly positioned, and the spray arm nozzles are not clogged. Avoid overloading the racks. Make sure your detergent isn't moist or clumping, and use the proper amount of detergent and rinse agent. Also, ensure the detergent dispenser lid closes properly. Finally, note that cutlery with a worn surface quality isn't suitable for dishwashers.
What to do if Viking FDW103 has water inside after rinse cycle?
To resolve the issue where water remains inside the Viking Dishwasher after the rinse cycle, clean all filters as described in the manual and ensure that the drain hose is properly placed and open.
What to do if my Viking Dishwashers does not start?
If your Viking dishwasher isn't starting, check a few things: first, make sure it's properly plugged in and that all fuses are working. Ensure the water supply is fully turned on and that the dishwasher door is securely closed. Lastly, verify that you've pressed the On/Off button.
General| Control Type | Electronic |
|---|---|
| Capacity | 10 place settings |
| Wash Cycles | 6 |
| Energy Star Rated | Yes |
| Place Settings | 10 |
| Programs | 6 |
| Delay Start | Yes |
| Half Load Option | Yes |
