Viking VDR5304B - Leg Installation

16
1
step
1
1
2
3
2
step
Legs are packed in cardboard top pack. Note: Legs should
be installed near to where appliance is to be used, as they
are not secure for long transit.
Note: It is strongly recommended
that a pallet or lift jack be used rather than tilting. Raise unit about
a foot.
Unscrew shipping bolts from couplings on all four corners .
4
step
Lower range gently to keep any undue strain from
legs and internal mounting hardware.
3
step
Screw legs into couplings on all four corners. The 48” W. ranges
have two additional legs located in the center of the unit.
Leg Installation