Viking VDSC365 User Manual (English)

Other manuals for Viking VDSC365

Questions and Answers:

S
Sara CardenasAug 12, 2025
Why is the Maxi-Broil and top heat not working on my Viking VDSC365 Ranges?
- J
  Jennifer SmithAug 13, 2025
  If your Viking Ranges Maxi-Broil function and top heat during baking aren't working, and the cycle light is on, it could be due to several reasons: * A problem with the selector switch contacts. * Open inside and outside broil elements. * Burned wiring or terminal connections. To resolve this, you may need to replace the selector switch, broil elements, or burned wiring and/or terminal connectors.
C
Christopher FinleyAug 16, 2025
How to fix convection bake not working on Viking VDSC365?
- H
  Holly WoodwardAug 17, 2025
  If the convection bake isn't working on your Viking Ranges, but the bake and broil functions are normal, and the cycle light is on, it could be due to: * An open selector switch contact. * An open convection motor winding. * Burned wiring or terminal connections. To fix this, you might need to replace the selector switch, convection motor, or any burned wiring or terminal connectors.
E
Erica LoganAug 20, 2025
Why is Maxi-Broil not working on my Viking VDSC365 Ranges, but Mini-Broil is?
- D
  Diana MathewsAug 20, 2025
  If your Viking Ranges Maxi-Broil function is not working, and the bake functions normally, and the cycle light is on, but Mini-Broil functions normally, it could be due to: * An open selector switch contact. * Open outside broil element. To resolve this, you may need to replace the selector switch or the outside broil element.
A
Ashley ThompsonAug 25, 2025
Viking VDSC365 Ranges self-clean not working, door won't lock, but power is present. What's wrong?
- A
  April ArmstrongAug 25, 2025
  If your Viking Ranges is not self-cleaning, the bake and broil functions are normal, the door won’t lock, but 120 VAC is present to the door lock module/timer, there's no motor movement, and the clean light is on, it could be due to: * Open relay contacts on the door lock module/timer. * Open contacts on the auto reset thermostat. * Open windings in the lock motor. To fix this, you might need to replace the door lock module/timer, the auto reset thermostat, or the lock motor assembly.
M
Michael YatesAug 28, 2025
Why is there no air circulation during convection cook on my Viking VDSC365?
- J
  Jonathan VaughnAug 28, 2025
  If the convection cook function heats in your Viking Ranges, but there's no air circulation, it could be due to: * An open winding in the convection fan motor. * A frozen motor shaft. * An open selector switch contact. To resolve this, you might need to replace the fan motor or the selector switch.
M
Michael MccoyAug 31, 2025
What causes the door lock motor to keep running on my Viking VDSC365 Ranges?
- D
  daniel87Aug 31, 2025
  If the door lock motor continues to run on your Viking Ranges, there's no signal to the sensor, and the clean light is on, it could be because the SW2 switch on the door lock mechanism is not closing. To fix this, you may need to adjust the SW2 switch position or replace the faulty switch.
C
Caleb CastilloSep 4, 2025
Why is there no heat when the door lock motor is engaged on my Viking Ranges?
- M
  Mary VazquezSep 4, 2025
  If the door lock motor is engaged on your Viking Ranges, there's a signal to the sensor, but there's no heat and the clean light is on, it could be that the door lock module/timer relay is not closing. To resolve this, you may need to replace the PC board.
A
Amanda ColemanSep 7, 2025
What to do if my Viking VDSC365 Ranges door locks, fan runs, but no heat?
- T
  tylersuzanneSep 8, 2025
  If the door lock motor is engaged on your Viking Ranges, the cooling fan motor runs, but there is no heat, it could be due to: * The door lock module/timer relay not closing. * A problem with SW3 on the door lock assembly. To fix this, you may need to replace the PC board or SW3.