25
Step 5: Lower the manifold of the new JetPak carefully as to
align the lower valve assembly and gasket into the bulkhead
fitting. Apply pressure downward as you move the JetPak
manifold until the manifold is secured in the wall clip assembly.
Step 6: Reattach the Snap-Cap and head rest.
Jets
Jet Types
A unique combination of the finest jets available are chosen
to optimally balance each JetPak with ideal performance and
massage intensity. You can achieve virtually limitless therapy
options by adjusting many of the jets for a custom experience.
Adjustable Jets Premium, Comfort
& Design Line
To adjust the water flow to Premium, Comfort & Design JetPaks,
turn the valve located in the lower portion of each JetPak.
• To increase jet water pressure, turn the valve handle counter
clockwise.
• To decrease jet water pressure, turn the valve handle
clockwise.
• To adjust the water flow to Premium, Comfort & Design
Line jets in the shell, turn the inner jet face.
• To increase jet water pressure, turn the jet face clockwise.
• To decrease jet water pressure, turn the jet face counter
clockwise.
NOTE: To allow for proper circulation, the valve located in
Premium, Comfort & Design JetPaks is designed to adjust jet
pressure, but will not completely stop jet flow.
Adjustable Jets X Series Spas
To adjust the water flow on adjustable jets, simply turn the outer
ring.
• To increase jet water pressure, turn the outer ring clockwise.
• To decrease jet water pressure, turn the outer ring counter
clockwise.
NOTE: Turning off jets will increase pressure to other jets on
same pump. To avoid unnecessary system pressure never shut off
all jets at the same time.
To Next Page
Loading...
Need help?
General
