EN
www.villeroy-boch.com // V 1.0 // 27.04.2018 // V0E100R1
31
To correct faults, use the following table.
Problem Possible solution
ViClean-I 100 does not work Check the service display. "00" is normally
shown.
If no code is shown, check the power supply.
Check whether the batteries have been placed
in the remote control correctly.
ViClean-I 100 does not respond to the remote
control
Check whether the corresponding lights on the
remote control light up when the buttons are
pressed. If not, replace the batteries.
Start up your ViClean-I 100 with the
ViClean app
(see "ViClean-I 100 app", page 15 ).
Replace the remote control if necessary.
ViClean-I 100 does not respond although the
lights on the remote control light up
If operation is not possible, check the service
display and contact our customer service.
To Next Page
Loading...
Need help?
General
