1. Description
The display module provides the function of calling via the contacts list of the outdoor station on which it is installed.
If the outdoor station has a keypad art. 41019, calls to the indoor stations can also be made by entering the desired number via the
keypad.
The device also provides visual feedback on the operating phases of the outdoor station, such as the indications for "call in pro
-
gress" and "talking", in addition to that associated with the entry control modules.
The display module is equipped with an installation menu with which the basic outdoor station conguration parameters can be
managed.
3.5” display for audio or audio-video modules, 3 buttons for calls from con-
tacts list backlit with white LEDs, 1 input congurable as external button for
CA door opener or PA door open, to be completed with front cover
Installation rules
Installation must be carried out by qualied persons in compliance with the current regulations regarding the installation of
electrical equipment in the country where the products are installed.
Regulatory compliance
EMC directive
Standards EN 60065, EN 61000-6-1 and EN 61000-6-3
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.
The instructions manual can be downloaded from the website www.vimar.com
WEEE - User information
The crossed bin symbol on the appliance or on its packaging indicates that the product at the end of its life must be
collected separately from other waste. The user must therefore hand the equipment at the end of its life cycle over to
the appropriate municipal centres for the dierentiated collection of electrical and electronic waste. As an alternative to
independent management, you can deliver the equipment you want to dispose of free of charge to the distributor when purchasing
a new appliance of an equivalent type. You can also deliver electronic products to be disposed of that are smaller than 25 cm for
free, with no obligation to purchase, to electronics distributors with a sales area of at least 400 m
2
. Proper sorted waste collection
for subsequent recycling, processing and environmentally conscious disposal of the old equipment helps to prevent any possible
negative impact on the environment and human health while promoting the practice of reusing and/or recycling materials used
in manufacture.
23
EN
41018
To Next Page
Loading...
Need help?
General
