Vimar ELVOX 41018

3. Conguration via PC
3.1 Advanced conguration (via PC)
In the case of installation in systems with 2-Wire Plus technology (with audio video, 41002, 41005), use the PC conguration soft-
ware "SaveProg", connecting to the audio/video module by USB cable. In the case of installation in systems with IP technology (with
audio video module 41006.1), use the PC conguration software "Video-Door IP manager", connecting to the system network. The
conguration software is available from the website www.vimar.com.
3.2. Programming the Contacts List and access control codes
The contacts list (up to 8192 items) and the access control codes (up to 2000 codes for Due Fili Plus installations) can be pro-
grammed using the conguration software from a PC, or directly from the relative conguration menu on the display (only for Due
Fili Plus installations).
3.2.1. Standby views
When rst switching
on, without having
programmed any
contacts list, the device
looks like this:
Press
Without a keypad
With a keypad
installed
After programming the
contacts list, the stand-
by view looks like this.
Contacts
Press
Porter
Contacts
Extension
Contacts
Porter
Without a keypad
With a switchboard
With switchboard and
keypad
25
EN
41018