28
7559 Tab 4.3
Professional firm function
This function, when active, following a call from an Outdoor Station, automatically activates the lock.
The professional firm function must be enabled and, subsequently, it can be activated or deactivated according to need.
To enable the function, see Installer configuration or via the SaveProg software)
There are two ways to activate it:
Activating professional firm via the key
1. In stand-by press for more than 5 seconds. A high-tone beep is emitted and the lock LED starts flashing.
BEEP
Now, when calling from an Outdoor Station, the lock connected to it is automatically activated and the call is ended
1
To Next Page
Loading...
