60
7559 Tab 4.3
Professional firm function
If the lock has been activated, when the outdoor station receives the ringtone end message the indoor station
automatically ends the call.
It is possible to avoid the automatic call end by excluding the SaveProg flag called Autom.Lock End which is normally
selected automatically when the Professional Firm function is enabled.
If the SaveProg flag called End Quick Call is active, the call is ended immediately after the lock actuation is confirmed,
and not on receipt of the ringtone end message.
The following table summarises the above:
FLAGS ACTIVE
EVENT RESULT
Enabling
Professional Firm
Activating
Professional Firm
Automatic Lock
End
Quick Call End
NO X X X
Call from
Outdoor Station
to Indoor Station
None
Yes NO X X
Call from
Outdoor Station
to Indoor Station
None
Yes Yes
NO
(modified by
Saveprog)
X
Call from
Outdoor Station
to Indoor Station
Sending 1s after
the door lock
control
Confirm lock
actuation and
subsequent
ringtone end
None
Yes Yes Yes NO
Call from
Outdoor Station
to Indoor Station
Sending 1s after
the door lock
control
Confirm lock
actuation and
subsequent
ringtone end
End call
Yes Yes Yes Yes
Call from
Outdoor Station
to Indoor Station
Sending 1s after
the door lock
control
Confirm lock
actuation
End call