42
7559 Tab 4.3
ICON FUNCTION DESCRIPTION DEFAULT VALUE
Actuations
Sets an actuation for each programmable key of the
Video entryphone. The user can therefore perform
directly, or via selection from a dedicated menu, the
actuation of relays, Outdoor Station locks and send
F1/F2 controls to Outdoor Stations.
empty
Intercom
Sets an Intercom for each programmable key of the
Video entryphone. The user can therefore call directly,
or via selection from a dedicated menu, another
Indoor Station/Reception switchboard or a notification
to all Switchboards (Alert)
empty
Assignment of
main or secondary
ID
It defines whether the video entryphone is Main or
Secondary and consequently assigns an ID to identify
it in the system.
–
Modify PIN
number
It modifies the PIN number to access the installer
configuration.
100
Reset factory
configuration
Deletes the settings and programming of the Indoor
Station, restoring it to the initial default operating
condition.
–
Enabling
Professional Firm
Enables/disables the Professional Firm function. Disabled
System
information
Displays useful information for Vimar customer service
(SAC/TSX), including ID, Firmware version, and so on:
–
To Next Page
Loading...
