EN
22
Roxie: 40170
5 Firmware updating
The update takes place:
• from the PC, using FWUpdate in SaveProg, via USB connection (USB C connector)
There are two rmwares to be updated via the FWUpdate software, to be executed in the correct order following the instructions
given in the Software.
• via "View Wireless” app.
During the updating phase, the user feedback from the outdoor station is provided by the indicator LEDs. The voice synthesis can
also be updated using SaveProg.
Refer to the guides in SaveProg and View Wireless for more details.
Signalling during the updating phase (red LED)
• On steady, while the bootloader is active;
• Flashing (irregularly), during deletion and writing.
5.1 Signalling during updates
Green RedGreen
LED Meaning
Red LED
•
On steady → update in progress
•
Flashing (irregularly), during deletion and writing
To Next Page
