Vimtag CM1 - User Manual

Questions and Answers

A
Anthony PottsJul 31, 2025
What to do if my Vimtag CM1 does not work?
- J
  Jennifer JohnsJul 31, 2025
  If your Vimtag Camcorder isn't working, ensure the STATE2 light flashes green three times every three seconds. Verify your internet connection, the router's LAN and WAN connections, and that UPNP and DHCP are enabled on the router. Confirm the router has a public IP address and the latest firmware. If issues persist, restore the camera to factory settings by pressing the 'RESET' button or disconnect and reconnect the router's power supply.
C
carrollronaldAug 4, 2025
How to improve poor image quality on Vimtag CM1 Camcorder?
- P
  Perry MartinAug 4, 2025
  To improve the image quality of your Vimtag Camcorder, log in to www.vimtag.com and find the image quality configuration settings. Adjust parameters such as brightness, contrast, and color saturation to enhance the image.
R
Robert BoltonAug 9, 2025
Why Vimtag CM1 app shows camera not online?
- R
  Russell MccarthyAug 9, 2025
  The Vimtag Camcorder app might show the camera as offline due to firewall protection (like MAC address filtering or binding). Contact your system administrator to check the firewall settings and make necessary configuration changes. Also, ensure that the router's DHCP server is enabled. If using multiple routers, each should connect to the others through WAN. You can also try restoring the camera to factory settings by pressing the 'RESET' button after connecting it to power.
S
Stephanie PearsonAug 13, 2025
How to fix unstable network connection on Vimtag Camcorder?
- J
  Jason MillerAug 13, 2025
  To fix an unstable network connection on your Vimtag Camcorder, first check the network cable. You can 'PING' the address of an existing device on the same network. A successful connection will show a reply like 'bytes = 32 time = 2 ms'. Also, ensure all network equipment, such as hubs and switches, are properly connected and functioning correctly.
K
Kyle TaylorAug 17, 2025
Why does my Vimtag CM1 Camcorder have a blur image?
- K
  Kevin AlexanderAug 17, 2025
  If your Vimtag Camcorder image is blurry, especially in dark places, rotate the lens until the image becomes clear. If viewing on a computer, the image may appear blurry because the larger screen amplifies the resolution.
J
jacksonnicholasAug 21, 2025
What to do if there is no image when viewing Vimtag CM1 Camcorder on a web?
- E
  Elizabeth HesterAug 21, 2025
  If you see no image when viewing your Vimtag Camcorder on the web, and you're using Internet Explorer, ensure ActiveX is enabled. Modify the browser's security settings to allow ActiveX plug-in installation. If using an Internet Explorer version earlier than 7.0, upgrade your web browser.
L
Lacey TaylorAug 26, 2025
Why does my Vimtag CM1 image have vertical white lines?
- C
  Crystal PerkinsAug 26, 2025
  Vertical white lines in your Vimtag Camcorder image are caused by the CMOS sensor being exposed to strong light, such as direct sunlight or halogen light. If the CMOS sensor has been in high light for a long time, avoid moving it to dark places, as this may damage the sensor.

Summary

Installation

Camera installation and Login

Steps for installing and logging into the camera.

Wireless Installation Considerations

Management

Admin Password

Changing the administrator password for secure access.

Network

Configuring wired (Ethernet) and wireless network connections.

Camera alarm arming settings

Configuring alarm inputs, outputs, and motion detection sensitivity.

Scheduled recording

Setting up timed recording schedules for the camera.

Troubleshooting

Troubleshooting, LED status indication

Explains LED status indicators and their corresponding troubleshooting steps.

Wireless Security

Vimtag CM1 Specifications

General

Digital zoom	8 x
Zoom capability	Yes
Fixed focal length	3.6 mm
Sensor type	CMOS
Optical sensor size	1/4 \
White balance	Auto
Camera pan control	No
Minimum illumination	0.1 lx
Total megapixels	1 MP
Maximum resolution	1280 x 720 pixels
Supported video modes	720p
Image quality adjustment	Brightness, Contrast, Saturation, Sharpness
Video compression formats	H.264
Audio formats supported	AAC
LED type	IR
Night vision distance	10 m
Number of illumination LEDs	6
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	-10 - 55 °C
Storage relative humidity (H-H)	0 - 90 %
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	RoHS
Type	IP security camera
Antenna type	Internal
Certification	CE, FCC
Operating frequency	2400 MHz
Placement supported	Indoor
Connectivity technology	Wireless
Ethernet LAN	-
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Streaming method	Multicast
Supported network protocols	TCP/IP, UDP/IP, HTTP, DHCP, RTMP, MUTP
Mounting type	Ceiling/Wall/Desk
Product color	Black, White
DC output current	1 A
DC output voltage	5
Number of cameras	1
HDD capacity	- GB
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB

Weight and Dimensions

Depth	49 mm
Width	40 mm
Height	111 mm
Weight	100 g