EasyManua.ls Logo

VINCENT SA-T7 MK - TECHNICAL SPECIFICATIONS

VINCENT SA-T7 MK
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
TECHNICAL SPECIFICATIONS
Frequency Response: 10Hz – 100kHz +/- 0,1 dB
Output Voltage: 3 V
T.H.D.: < 0,001 % (1 kHz, Output Voltage 2Veff an 10 KOhm)
Amplification: typ. 13,3 dB (Volume Control max. Gain)
Input Sensitivity: 430 mV (2V Output Voltage)
Signal-to-Noise Ratio: typ. > 100dB (A)
Input Impedance: > 22 kOhm
Max. Power Consumption: 58 Watt
Inputs: 6 x Stereo RCA, 1 x Optical, 1 x Coaxial, 1 x Bluetooth
Outputs: 2 x Stereo RCA Pre-Out, 1 x Stereo RCA Rec-Out,
2 x 3,5 mm Jack (Power Control)
Tubes: 4 x 6SCH9P, 4 x 6SCH51P, 1 x 85A2
Playable Digital Formats: WAV, FLAC, APE, LPCM, MP3, ACC, AC3, WMA
Colour: Black / Silver
Weight: 8,5 kg
Dimensions (WxHxD): 430 x 135 x 370 mm
Sintron Distribution GmbH hereby declares that this product complies with the
Radio Equipment Directive 2014/53/EU. The corresponding EU declaration of
conformity is available at the following internet address: www.sintron.de/KE
FURTHER INFORMATION AS DEFINDE BY THE
ECODESIGN REGULATION
Power consumption in OFF-mode: <0,4W
Power consumption in auto standby mode: <0,4W
Power consumption in cross-linked standby mode (BT): <4W
Time without input signal until auto-standby: 15 min. (autostandby can be switched off).
The wireless cross-link port (BT) can be deactivated (switched off) with the input selector (INPUT).