Need help?Do you have a question about the VINCENT SV-200 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Input Sensitivity | 200mV |
| Signal-to-Noise Ratio | > 90 dB |
| Weight | 12kg |
| Total Harmonic Distortion (THD) | 0.1% |
| Total harmonic distortion | 0.1% |
| Input impedance | 47 kOhm |
| Inputs | 2 x RCA |
Details on product maintenance, user modifications, and professional servicing requirements.
Guidelines for connecting and handling the power cable to prevent damage or hazards.
Procedure for safely powering down the device before connecting or disconnecting components.
Precautions against exposure to liquids, extreme temperatures, and vibration.
Ensuring adequate ventilation space around the appliance to prevent overheating.
Advice on setting volume levels to prevent hearing damage and unintentional high volumes.
Instructions for safely cleaning the exterior of the appliance using appropriate materials.
Information regarding battery usage, replacement, and disposal for remote control.
Guidance on optimal placement for sound quality and system integration.
Information on proper disposal of old electrical and electronic equipment.
Copyright, trademark, and disclaimer information regarding the manual and product.
Recommendation to keep original packaging for future transport and protection.
Definitions and meanings of symbols used throughout the manual for user guidance.
Detailed overview of the front panel controls, inputs, and indicators of the SV-200 amplifier.
Detailed overview of the rear panel connections, inputs, outputs, and selectors of the SV-200 amplifier.
Instructions for using, changing, and disposing of batteries for the remote control unit.
Instruction to remove protective plastic caps from rear connections before installation.
Guidance on correctly connecting RCA cables, noting color coding for channels.
Advice on ensuring tight connections to prevent noise interference and malfunctions.
Recommendations for connecting loudspeaker cables, including banana plugs and spade lugs.
Detailed instructions for connecting speaker cables using banana plugs, spade lugs, or bare wires.
Procedure for powering the preamplifier on and off; it has no standby mode.
How to choose audio sources using the front dial or remote control buttons.
Adjusting the system volume using the front knob or remote control buttons.
Feature to strengthen low and high frequencies at low volume for improved auditory sensation.
Period for components to reach maximum performance for optimal sound quality.
Troubleshooting humming noise caused by combination with amplifier or external interference.
Possible causes and countermeasures for the unit not powering on.
Possible causes and countermeasures for lack of audio output on either channel.
Possible causes and countermeasures for audio only playing on one channel.
Potential causes like loose connections or improper setup leading to reduced audio fidelity.
Troubleshooting steps for the remote control not performing functions.
Addressing humming noise issues, potentially related to grounding or interference.
To Next Page
