Need help?Do you have a question about the VINCENT SV-400 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Signal-to-Noise Ratio | > 90 dB |
| Total Harmonic Distortion (THD) | 0.1% |
| Inputs | RCA |
| Input Impedance | 47 kOhm |
| Outputs | Speaker terminals |
Details on necessary maintenance and modifications, emphasizing professional service.
Guidelines for safe connection and disconnection of the power cable to prevent damage.
Instructions on when and how to properly switch off the appliance.
Warnings against exposing the appliance to liquids, moisture, or extreme environmental conditions.
Terminals for connecting loudspeakers using screw terminals or banana plugs.
Guidance on correctly connecting RCA cables, noting color coding and hazards.
Advice on ensuring tight plug connections to prevent noise and malfunctions.
Recommendations for speaker cable types and proper connection to terminals.
Procedure for turning the amplifier on and off, noting no standby function.
How to change playback audio sources using input selector buttons.
Instructions for adjusting the volume using VOL+/VOL- buttons.
Using the MUTE function to silence outputs and restore volume.
Connecting and using external devices via the USB input.
Troubleshooting steps for the unit not powering on.
Troubleshooting steps for lack of audio output on both channels.
Troubleshooting steps for audio issues affecting only one channel.
Potential causes and solutions for degraded sound quality.
To Next Page
