Need help?Do you have a question about the VINCENT SV-228 and is the answer not in the manual?
General| Total Harmonic Distortion (THD) | < 0.05 % |
|---|---|
| Signal-to-Noise Ratio | > 100 dB |
| Input Impedance | 47 kOhm |
| Mains supply | 230 V / 50 Hz |
| Dimensions (W x H x D) | 430 x 150 x 380mm |
| Inputs | RCA, XLR |
| Outputs | Speaker terminals |
Details on servicing and modifications, including warranty voidance and professional repair requirements.
Instructions for safely connecting and handling the power cable to prevent damage.
Guidance on safely powering down the unit and waiting periods before disconnecting cables.
Warnings against liquids, moisture, high temperatures, and strong vibration exposure.
Ensuring adequate ventilation around the appliance for heat dissipation.
The main power switch for turning the device on/off, disconnecting from mains power.
Terminals for connecting two pairs of loudspeakers (A and B).
Connector for the mains power cable and housing for the device's fuse.
Guidance on correctly connecting RCA cables for audio inputs and outputs.
Detailed instructions on correctly wiring loudspeakers to the amplifier terminals.
How to switch the amplifier on and off using the front panel power button.
How to select the audio source for playback using the input selector.
How to change the amplifier's volume using the front panel knob or remote buttons.
How to use the MUTE button on the remote to silence various audio outputs.
How to adjust the high-frequency sound proportions using the treble control.
How to adjust the low-frequency sound proportions using the bass control.
Addresses issues where the unit fails to power on after pressing the power button.
Diagnoses problems when the unit is on but no audio is heard from speakers.
Solutions for audio playback issues affecting only one audio channel.
Possible causes and fixes for degraded audio performance and sound quality.
Reasons why the remote control may not be functioning correctly.
To Next Page
