Need help?Do you have a question about the VINCENT SV-237MK and is the answer not in the manual?
General| Total Harmonic Distortion | < 0.1% (1 kHz, 1W) |
|---|---|
| Signal-to-Noise Ratio | > 90 dB |
| Tubes | 1 x 12AX7, 2 x 6N1P |
| Type | Integrated Amplifier |
| Frequency Response | 20Hz - 20kHz |
| Inputs | 6 x RCA |
| Outputs | 1 x RCA (Pre-out), Speaker Terminals |
| Input Impedance | 47 kOhms |
Warning against opening the appliance due to electric shock risk.
Covers maintenance, power, environment, heat, volume, and cleaning precautions.
Adjustments for volume, bass, and treble frequency proportions.
Connects source devices via RCA, Optical, or Coaxial inputs.
Terminals for loudspeakers, AC power input, and power control.
Correct insertion, polarity, and general safety for batteries.
Increases or decreases the amplifier's volume level.
Details on connecting speaker cables securely to terminals.
Linking audio outputs from source devices to amplifier inputs.
Rules for connecting devices via power control to avoid issues.
Connects one or two pairs of loudspeakers to the amplifier.
Ensures correct positive/negative wire connection to terminals.
Minimum impedance requirements and correct polarity for speakers.
Turning the unit on/off and selecting audio sources.
Adjusting volume and muting audio outputs.
Diagnosing and fixing issues when the unit does not turn on.
Troubleshooting why no sound is output from either channel.
Diagnosing and fixing problems with audio playback on one channel only.
To Next Page
