EasyManua.ls Logo

VINCENT SV-237MK - Error Search and Solutions; Poor Sound Quality Issues; Remote Control Malfunctions; Humming Noise Troubleshooting

VINCENT SV-237MK
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Vincent
45
SEARCH FOR ERRORS
Symptom Possible Cause Countermeasure
Poor sound quality
T
he cable connections are not tight, the con-
nectors are dirty or a cable is defective.
The tone settings on the dials “TREBLE” or
“BASS” have not been selected correctly.
A record player has been connected to a line
l
evel input without using a phono preampli-
fier.
C
heck the cables and cable connections.
Check the settings selected there.
Interconnect a phono preamplifier.
The remote control
cannot perform any
functions
No batteries inserted in the remote control,
batteries are not inserted correctly or are
depleted.
The line-of-sight between the remote control
and the unit is obstructed, the range was
exceeded or the hand unit was operated from
a position too far to one side.
The unit is not switched on.
Check and replace the batteries if necessary.
Try to point the remote control at the front of
the unit only when the sight-line is clear,
within a 7-metre distance and, if possible,
facing the unit.
Switch on the unit.
Humming low
frequency noise is
audible, even as
no audio source is
playing back
See section "Net frequency noise" in the chapter "Tips".