EasyManua.ls Logo

VINCENT SV-700 User Manual

VINCENT SV-700
72 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Vincent
SV-700
Class-A Stereo-Vollverstärker
Integrated Class A Stereo Amplifier
Amplificateur intégré stéréo classe A
Bedienungsanleitung deutsch
Instructions for use english
Manuel d‘utilisation français
Question and Answer IconNeed help?

Do you have a question about the VINCENT SV-700 and is the answer not in the manual?

VINCENT SV-700 Specifications

General IconGeneral
Total Harmonic Distortion (THD)< 0.1 % (1 kHz, 1 W)
Input Sensitivity300 mV
Signal-to-Noise Ratio> 90 dB
Input Impedance47 kOhm
TypeIntegrated Amplifier
Power Output (8 Ohm)2 x 50 W
Dimensions (W x H x D)430 x 150 x 435 mm
Inputs4 x RCA
Outputs1 x Speaker terminals
Tubes2 x EL34

Summary

Safety Guidelines

Maintenance

Information on proper maintenance and qualified professional assistance.

Power Cable Connection

Guidance on connecting and disconnecting the power cable safely.

Switching Off

Instructions for safely switching off the appliance before various operations.

Moisture/Heat/Vibration

Precautions regarding liquids, moisture, heat, and vibration.

Heat Build-up

Ensuring adequate ventilation around the appliance.

Volume

Advice on safe volume settings to prevent hearing damage.

Cleaning

Instructions for cleaning the appliance exterior safely.

Other Instructions

Setting up the appliance

Guidance on optimal placement for sound quality.

Included in Delivery

Description of the Appliance

Front View

INPUT: Input Selector

Dial to choose between six audio inputs.

VOLUME: Volume dial

Knob for adjusting the main volume level.

CLASS A: amplifier circuitry mode

Button to toggle between Class A and Class AB amplifier modes.

POWER

Main power switch to turn the device on or off.

SPEAKER A/B

Button to individually switch speaker outputs A and B on or off.

Remote Control

BATTERIES

Instructions for using and changing batteries in the remote control.

Buttons of the Remote Control

Installation

Connection of the Loudspeakers

Connection of speaker pairs

Guidance on connecting one or two pairs of loudspeakers and impedance requirements.

Connection of the Power Cable

Switching the Voltage

Operating the Appliance

Search for Errors

Technical Specifications

Related product manuals