苏州万佳电器有限公司
Suzhou wanjia Electric Co.,Ltd.
3.Wheel Diameter Settings
DL represents wheel diameter settings. Wheel SIZE represents wheel diameter.
The wheel size is only for your information, not settable.
Wheel Diameter Settings Interface
4.Speed-limit Settings
SP represents the limited speed settings. When the current speed is faster than speed
limit, the E-bike system will switch off automatically. Speed limit range is 5Km/h to 46Km/h.
The default value is 29Km/h. The Speed limit is only for your information, not settable
Speed Limit Settings Interface
5.Walk Speed setting
PS refers to push-assist mode speed. The settable range is 3-6 km/h. 3km/h is the
slowest while 6km/h is the fastest. The default push-assist speed is decided by the
controller.
Press the UP/DOWN button to increase or decrease the speed limit to your desired
value. Hold the MODE button 1s to confirm and exit the settings status.
6. software version
CL refers to the motor software version of this E-bike.
DP refers to the display software version of this E-bike
To Next Page
Loading...
