苏州万佳电器有限公司
Suzhou wanjia Electric Co.,Ltd.
General Operation
1.Switching the E-bike System On/Off
To switch on the E-bike system and provide the power supply to the controller, hold the
On/Off button on the remote for 1 s.
To switch off the E-bike system, hold the On/Off button for 1s. The E-bike system no
longer uses the battery power.
When E-bike system is switched off, the leakage current is less than 1 μA.
■
When the E-bike is parked for over 15 minutes, the E-bike system switches off
automatically.
2.Display Interface
After switching on the E-bike system, the display will show Current Speed and TRIP by
default.
Press “i” button on the remote to switch between the indication functions below:
Trip Distance (Km)→ODO (Km)→Trip Time (min)→Max. Speed (Km/h) → Avg. Speed
(Km/h) → RANGE (Km)
Display interface
3.Switching Push-assistance Mode On/Off
■
To activate the push-assistance function, short press the MODE button and hold the DOWN
button between 3S.The E-bike is activated with a uniform speed while the screen displays
shown “ ”. (Without special settings, the E-bike will start at a constant speed at a standard
speed of 6km/h by default).
■
The push-assistance function will be switched off as soon as you release the DOWN button
and E-bike gets back to the status before the push-assistance is engaged.
To Next Page
Loading...
