苏州万佳电器有限公司
Suzhou wanjia Electric Co.,Ltd.
Push-assistance
Mode
⬛ Push-assistance function may only be used when pushing the E-bike. Be aware of
danger of injury when the wheels of the E-bike do not have ground contact while
using the push-assistance function.
4.Switching the Lighting On/Off
To switch on bike light, hold the UP button for 1s. The lighting icon comes out and display
backlight brightness is automatically reduced.
Likewise, hold the UP button for 1s again, the bike light switches off. The lighting icon is gone
and display resumes backlight brightness.
Switch the Lighting On/Off Interface
5.Assist Level Options
The assist level of the E-bike drive can be changed anytime, even during riding.Press the UP or
DOWN button to switch between the assist levels and change the motor output power
The assist level ranges from 0 to 5 (level 0 to level 5). The default assist level is “1” when the
display is started. The output power is zero on Level “0”. Level “1” is the minimum output power.
Level “5” is the maximum output power.
To Next Page
Loading...
