Reversible door
Follow the instructions carefully
NOTE: Before you start the unit needs to be disconnected from the main grid.
We recommend that the change of door is done by a technician (we recommend two persons)
Helping material:
4 mm Allen key;
Flat-headed screwdriver
Torx 20 (TX20) screwdriver
2. Place the appliance on its back (prefera-
bly on a soft foundation)
1. Open the door, unscrew the two screws
xing the bottom cover (Torx20). Do not
remove the cover yet.
3. Loosen the upper hinge and remove it ( 4
mm Allen key)
To Next Page
Loading...
