IMPORTANT - THIS SPACER MUST BE ATTACHED TO THE UNIT BEFORE
INSTALLATION FOR VENTILATION PURPOSE. FAILURE TO DO SO VOIDS THE
WARRANTY
TURNING ON YOUR WINE CELLAR
Plug in and switch on the cellar by pressing on the power button for a few seconds.
When you use the wine cellar for the first time (or restart the wine cellar after having it
shut off for a long time), there will be a few degrees, variance between the temperature
you have selected and the one indicated on the LED readout. This is normal and it is due
to the length of the activation time. Once the wine cellar is running for a few hours
everything will stabilize.
Important: If the unit is unplugged, power is lost, or turned off, wait 3 to 5 minutes
before restarting the unit. The wine cellar will not start if you attempt to restart before
this time delay.
To Next Page
Loading...
