Operators guide
15
EFP Quickfit™ adaptor
The camera is attached to the head by means of a EFP Quickfit™ adaptor [15], which is
mounted onto the slide plate [16] ex factory. The adaptor is supplied with a wedge plate and two
3/8 in. camera screws for rapid mounting of the camera.
Carrying handle
A carrying handle is provided at the rear of the platform under the slide plate. To access the
handle, the slide plate may need to be repositioned further along the platform (for more
information see ‘Transportation’ on page 22). Before attempting to transport the head using the
carrying handle, the camera system must be removed and the head dismounted from the
pedestal.
To Next Page
Loading...
