Vinten Vision 5LF - Page 45

45
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.4 Vision 5LF Pan and Tilt Head - Pan Mechanism
Item
No.
Part
No. Nomenclature Qty
1 3325-333 Drag knob retainer/stop 1
2 M003-103* Screw, Pozi csk hd, M2.5 x 8mm lg 3
3 3325-332* Drag knob cap 1
4 M004-351 Screw, raised chs hd, M3 x 10 mm lg 1
5 3395-217* Pan drag knob 1
6 3325-317 Pan drag knob boss 1
7 3325-316 Pan drag shaft 1
8 Thrust bearing, comprising:
N552-012 Thrust race, 3/8 in. x 13/16 in. x 5/64 in. 1
N552-013 Thrust washer, 3/8 in. x 13/16 in. x 1/32 in. 2
9 Q001-012* ‘O' ring, 5/16 in. ID x 1/16 in. section 1
10 3395-14 Mechanism housing assembly 1
11 3325-361 Level bubble 1
12 M006-903* Screw, skt csk hd, M5 x 12 mm lg 1
13 3325-313 Pan axis shaft washer 1
14 P200-220 Radial ball bearing, 10 mm x 26 mm x 8 mm 1
15 3395-207 Pan bearing housing 1
16 R900H034* ‘O' ring, 10.1 mm ID x 1.6 mm section 1
17 R900H001* ‘O' ring, 7.1 mm ID x 1.6 mm section 1
18 Thrust bearing, comprising:
P602-023 Thrust race, 50 mm x 70 mm x 3 mm 1
P602-024 Thrust washer, 50 mm x 70 mm x 1 mm 2
19 3321-207
or
3390-222
Pan drag top plate (for head from Serial No. 1288)
or
Pan drag top plate (for head up to Serial No. 1287)
1
20 Q500-032* Omniseal, 2.118 in. x 1.940 in. 1
21 3325-312 Pan drag actuator 1
22 3395-15 Drag shoe assembly 1
23 R900H033*
or
R900H010*
‘O' ring, 72 mm ID x 1.5 mm section (for head from Serial No. 1288)
or
‘O' ring, 75 mm ID x 1.5 mm section (for head up to Serial No. 1287)
1