Viofo T130 - Advanced Settings

On means IR lights are always on, so the video color is black and white.
Auto means the dash cam will decide to turn on/off infrared lights with
different light condition. Off means the IR lights are all turned off.
You can also short press [ ] button to enable / disable the IR LED.
① Auto Event Detection
The camera will automatically record a video sequence while a moving
object is detected during parking. It will stop recording without new
movements.
② Time Lapse recording
Time lapse record a video at low frames at 1 / 2 / 3 / 5 / 10 / 15 fps, It keeps
recording continuously without audio recorded.
③ Low Bitrate Recording
This mode records video and audio at a low bitrate for front, rear and
interior. It records continuously producing small file sizes.
Note: We recommend to buy VIOFO HK4 ACC hardwire kit cable for
parking mode recording. The parking recording files name of front
camera is Year_Date_Time_**PF, Year_Date_Time_**PI for interior
camera and Year_Date_Time_**PR for rear camera.
• Parking Mode: There are 3 options under parking mode:
• Enter Parking Mode Timer:
Set the timer for entering parking mode. (Only for hardwire cable, if you
use external battery, this function will work.)
"OFF" means the camera will enter parking mode right away when the
engine is off.
"90s" means the camera will enter parking mode 90 seconds after engine
is off.
• Parking Recording Duration:
"On" means the camera will keep recording until the hardwire kits cut the
power supply.
"1 hour" means the camera will shut down 1 hour after it enters parking
mode.
• Time Synchronization: Time synchronization with mobile phone.
• Parking G-Sensor:
Adjusts the sensitivity of the motion detection so minor motion caused by
wind or rain doesn't trigger a recording.
Turn the image upside down. You can set the Front, Interior and Rear
camera image rotation separately.
The G-sensor detects significant or sudden movement (such as an impact
or collision), it will trigger an event recording. We suggest setting it to High
sensitivity in parking mode recording.
• Parking Motion Detection:
• Image Rotation:
• Notification Sounds:
Off / Button beep only / Startup sound only / All on.
You can enable/disable the button and startup sounds.
• Date Format: You can choose the date format of the camera
• Boot delay: The camera will boot # seconds after being powered on. The
settings are off / 5s / 10s.
• IR LED: Off / On / Auto
23 24