VIOMI V2 max User Manual

Four suction modes are available in the Mi Home/Xiaomi Home app: Silent, Standard, Medium, and Turbo. The default mode is Standard.
Cleaning Preferences
In the Do Not Disturb mode, the vacuum-mop will not resume cleanup, perform scheduled cleanup, or issue voice alerts.
Do Not Disturb Mode is enabled by default and can be disabled via the app.
Do Not Disturb Mode
The vacuum-mop has a feature of resuming cleanup. If the vacuum-mop starts running low baery during a cleaning task, it will automatically return to the
charging dock to recharge. Once the vacuum-mop is fully charged, it will resume cleanup where it le off. If the cleaning task is manually ended while the
vacuum-mop is charging, cleanup will not be resumed.
Resuming Cleanup
You can use the app to set up the zoned area, then the vacuum-mop will clean up within the zoned area you selected.
Zoned Area
You can set a specified area on the map via the app, then the vacuum-mop will automatically navigate to the area and clean a square-shaped area of 2 × 2
meters.
Clean There
You can schedule cleaning times in the app. The vacuum-mop will automatically start cleaning at the scheduled times, then return to the charging dock
aer the cleaning is completed.
Note: The vacuum-mop will not do the scheduled cleanup during the Do Not Disturb period if Do Not Disturb mode is enabled.
Scheduled Cleanup
You can set up virtual walls and restricted areas in the app to prevent the vacuum-mop from entering areas you wish not to clean.
Virtual Walls/Restricted Areas
You can use the app to enable smart mapping. This allows the vacuum-mop to automatically update its map aer completing a cleaning task and
recharging.
Smart Mapping
09

VIOMI V2 max Specifications

General

Brand	VIOMI
Model	V2 max
Category	Vacuum Cleaner
Language	English