VIOMI V2 max User Manual

1. Open the cover of vacuum-mop,
remove the 2-in-1 dust compartment
with water reservoir, then remove
the filter as shown in the figure.
2. Empty the contents of the dust
compartment. Clean the
compartment using the cleaning
brush, then align and reinstall the
filter.
2-in-1 Dust Compartment with Water Reservoir
3. Reinstall the 2-in-1 dust
compartment with water reservoir
into the vacuum-mop until it clicks
into place, then close the cover of
the vacuum-mop.
Care & Maintenance
1. Flip the vacuum-mop over and
pinch the clips to remove the main
brush guard.
2. Remove the main brush and the
main brush bearing.
3. Use the cleaning brush to clean
the main brush.
4. Reinstall the main brush and its
bearing, then put back and press
down the main brush guard until it
locks into place.
Note: It is recommended to replace the main brush every 6–12 months for optimal
cleaning effectiveness.
Filter
To clean the filter in 2-in-1 dust
compartment with water reservoir,
remove it as indicated in the diagram.
Main Brush
• Aer rinsing the filter with water, make sure it is thoroughly dry when
reinstalling the filter into 2-in-1 dust compartment with water
reservoir.
• To prevent the filter from becoming clogged, it is recommended to
regularly clean the filter using the cleaning brush.
• It is recommended to replace the filter every 3 to 6 months.
11
Clips
Main Brush Guard
Main Brush
Main Brush Bearing

VIOMI V2 max Specifications

General

Brand	VIOMI
Model	V2 max
Category	Vacuum Cleaner
Language	English