VIOMI V3 Max - Connect with Mi Home;Xiaomi Home App; Resetting Wi-Fi

11
Connect with Mi Home/Xiaomi Home App
This product works with Mi Home/Xiaomi Home app *. Control your device, and interact it and other smart home devices with Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the
connection setup page if the app is installed already. Or search "Mi Home/Xiaomi
Home" in the app Store to download and install it.
Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe. The name of the app displayed on your device should be taken as the default.
Note:
The version of the app might have been updated, please follow the instructions based on the current app ver
sion.
Reseing Wi-Fi
When switching to a new router or changing your Wi-Fi password, you will need to reset the vacuum-mop's Wi-Fi connection. Turn on the
vacuum-mop, then simultaneously press and hold the buons and for 3 seconds until you hear a voice saying "Waiting for the network
configuration". Once the Wi-Fi connection is successfully reset, you can reconnect the vacuum-mop.
Note:
• Only the 2.4GHz band, but not the 5GHz one, is supported in the Wi-Fi connection.Please switch to the 2.4GHz band if your Wi-Fi network is dual-band
and try again.
• If the connection between your phone and robot vacuum fails, you can reset Wi-Fi again and add it again aer entering the network configuration
mode.
• As version upgrade and update may be made, please follow internal guidelines in the app for operation.