VIOMI V3 Manual

2. Install the 2-in-1 dust compartment
with water reservoir into the
vacuum-mop until it locks into place.
3. Aach the mop to the holder
and press the velcro strips firmly
together.
Vacuuming and mopping mode: Install 2-in-1 dust
compartment with water reservoir, mop holder, and mop.
1. Open the water reservoir lid, fill
up the reservoir, then reaach the
lid.
Cleanup mode: Install the dust compartment or 2-in-1 dust
compartment with water reservoir.
1. Open the cover of the vacuum-mop and place the dust compart-
ment or 2-in-1 dust compartment with water reservoir in the direction
shown until it locks into place.
2. Turn on the vacuum-mop. It is now ready to start cleaning.
Installing Accessories for Desired Mode
06

VIOMI V3 Specifications

General

Suction Power	2600 Pa
Battery Capacity	4900 mAh
Dustbin Capacity	550 ml
Water Tank Capacity	550 ml
Navigation	LDS Laser Navigation
Runtime	150 minutes
Mapping	Yes, Multi-floor Mapping
Mopping Function	Yes
Climbing Ability	20 mm
Charging Time	4 hours
Weight	3.6 kg
Connectivity	Wi-Fi
Cleaning Modes	Auto, Spot, Edge
Control	Mobile App, Voice Control (Amazon Alexa, Google Assistant)
Virtual Walls	Yes