VIOMI V3 Manual

Blue: Turned on/Working normally/Fully charged/Wi-Fi Connected
Breathing yellow: Charging
Blinking red: Error
Installation
1. Connect the charging dock to the power outlet. 3. Place the charging dock on a level ground against a wall.
2. Install the side brush on the upper-le corner of the vacuum-mop, as
shown in the figure. An extra side brush in the package is provided as a
spare and does not need to be installed.
4. When using the vacuum-mop for the first time, press and hold the
buon for 3 seconds to turn on the vacuum-mop. Once the
indicator lights up, manually place the vacuum-mop onto the
charging dock to charge. Then just press the buon when the
vacuum-mop is cleaning, it will automatically go to the charging
dock to recharge.
05
0.
5 m
e
t
e
rs
0.
5
m
et
e
rs
1.
5
m
e
t
e
r
s

VIOMI V3 Specifications

General

Suction Power	2600 Pa
Battery Capacity	4900 mAh
Dustbin Capacity	550 ml
Water Tank Capacity	550 ml
Navigation	LDS Laser Navigation
Runtime	150 minutes
Mapping	Yes, Multi-floor Mapping
Mopping Function	Yes
Climbing Ability	20 mm
Charging Time	4 hours
Weight	3.6 kg
Connectivity	Wi-Fi
Cleaning Modes	Auto, Spot, Edge
Control	Mobile App, Voice Control (Amazon Alexa, Google Assistant)
Virtual Walls	Yes