Viper 4806V User Manual

14
© 2013 Directed. All rights reserved.
Example for 12 minute runtime:
• 3 LED’s: 6 to 9 minutes remaining (50 - 75% of time selected).
• 1 LED: less than 3 minutes remaining (<25% of time selected).
Note: Remote start must be On to use this feature.
*See “Advanced Start” under “Remote Start Features” for more de-
tails.
Advanced Commands: (Level 4)
Press and release the button 4 times first, before pressing one of
the following command buttons.
Defogger*
Press and release
Activates the vehicle Defogger circuit (if connected) while Remote Start
is activated and the parking lights flash 3 times. The Remote start LED
and 1 beep play to comfirm. For convenience, the Defogger circuit
will also automatically activate 10 seconds after remote starting if the
temperature is below 55°F.
Note
Remote Start must be active to use this feature.
AUX 4
Press and release AUX
Activates (or if On, deactivates) the Aux 4 output. The Aux LED and
On tones or Off tones play to confirm.
* This feature must be installed and turned on by an authorized
Directed dealer.

Viper 4806V Specifications

General

Remote Start	Yes
2-Way Communication	Yes
Number of Remotes	2
LCD Remote	Yes
Keyless Entry	Yes
SmartStart Compatible	Yes
Number of Buttons on Remotes	5
Remote Control	Yes
Door Lock Control	Yes
Trunk Release	Yes
Panic Mode	Yes
Valet Mode	Yes
Remote Start Ready	Yes
System Type	2-Way Security & Remote Start System
Alarm Notification	Yes
Shock Sensor	Yes
Starter Kill	Yes
Range	Up to 1 Mile