Need help?Do you have a question about the Viper 480XV and is the answer not in the manual?
General| Type | Car Alarm |
|---|---|
| Channels | 4 |
| Remote Start | Yes |
| Panic Mode | Yes |
| Shock Sensor | Yes |
| Keyless Entry | Yes |
| LED Status Indicator | Yes |
| Compatibility | Universal |
| Number of Buttons on Remotes | 5 |
| Number of Remotes Included | 2 |
| Alarm Type | Audible and Visual |
| Range | Up to 1/4 mile |
| Remote Control | Yes |
| LCD Display | No |
| Starter Kill | Yes |
| Door Lock Control | Yes |
| Trunk Release | Yes |
| Valet Mode | Yes |
| Battery Backup | No |
| System Type | 2-Way |
Detailed instructions for connecting the primary harness wires.
Guide for connecting ignition and starter wires using pigtail harness.
Guide for connecting fuel pump wires using pigtail harness.
Lists and describes eight common vehicle door lock system types.
Step-by-step guide for installing the siren.
Steps for selecting and programming system features.
Lists and describes basic system features and their settings.
Lists and describes advanced system features and their settings.
Lists and describes advanced system features, some Bitwriter-only.
Detailed explanations of basic system features.
Detailed explanations of advanced system features.
Detailed explanations of advanced system features.
Steps to program transmitter buttons to specific channels.
Steps to enter the ultrasonic sensor adjustment mode.
How to increase sensor sensitivity.
How to decrease ultrasonic sensor sensitivity.
Troubleshooting steps for system arm/disarm issues.
To Next Page
