Viper 480XV - Decrease Sensitivity

44
©
2005
Directed Electronics, Inc. all rights reserved
2.
DDeeccrreeaassee SSeennssiittiivviittyy
—Press and release the button to decrease sensor sensitivity by one step. The
siren will beep 1-time for each step decreased in adjustment (1 vibrate if programmed). The sensor
adjustment reaches minimum sensitivity (sensor Off) when the indicator bar is empty
BAR 1
BAR 10
SENSOR LEVEL SETTING
SHOWN AT MID-POINT
nnoottee::
When the sensor adjustment mode is exited, the bar indicator will indicate con-
tinuously. For example if level 15 was being set (bar 1-7, bar 8 flashing), upon exiting
adjustment mode bars 1-8 will indicate continuously.
Sensor
Adjustment
Level
Bar Number and Indication
0 no bars displayed
1 bar 1 flashes
2 bar 1 solid
3 bar 1 solid, bar 2 flashes
4 bar 1-2 solid
5 bar 1-2 solid, bar 3 flashes
6 bar 1-3 solid
7 bar 1-3 solid, bar 4 flashes
8 bar 1-4 solid
9 bar 1-4 solid, bar 5 flashes
10 bar 1-5 solid
11 bar 1-5 solid, bar 6 flashes
12 bar 1-6 solid
13 bar 1-6 solid, bar 7 flashes
14 bar 1-7 solid
15 bar 1-7 solid, bar 8 flashes
16 bar 1-8 solid
17 bar 1-8 solid, bar 9 flashes
18 bar 1-9 solid
19 bar 1-9 solid, bar 10 flashes
20 bar 1-10 solid